HI GEAR cooling system repair agent for commercial transport 444ml
code: HG9029
manufacturer: HI-GEAR
ir noliktavā, 6 cnt.
€899Without VAT 7.43 €
- Manufacturer
Price includes VAT 21%.
The indicated price is valid ordering till 06.09.2025.
The indicated price is valid ordering till 06.09.2025.
HI GEAR Cooling system repair agent for commercial vehicles 444ml.
This composition is designed to repair leaks in radiators and car cooling systems that do not require disassembly, removal and soldering of the radiator. This composition for the repair of radiators and cooling systems Hi-Gear HG9025 prevents antifreeze (antifreeze) leaks: at the place where copper radiators are soldered; plastic tanks at the intersection with a modern composite radiator aluminum heat exchanger; through broken radiator pipes (before repair it is recommended to press them with pasatizh above and below the leak); through the pump or thermostat seal (white engine stains); through radiator and heater tap pipes; through the heater valve seal (antifreeze flows inside); from the heater radiator (the smell of antifreeze in the cabin and the glass sweats). Hi-Gear HG9025 does not evaporate, withstands high temperatures, stays in the system and prevents further leaks.
Safe for aluminum, steel, cast iron, non-ferrous alloys, plastics and rubber.
HG9025 is compatible with all types of antifreeze and water.
Does not block the radiator pipes, hardens only due to leakage.
The radiator must be clean and filled with coolant.
Warm up the engine with the radiator cap open and the internal heater tap open.
Shake the product and pour into the radiator.
Close the radiator cap. Run the engine at high speed or drive until the leak stops.
To prevent further leakage, do not spill coolant.
The package is designed for cooling systems up to 17 liters.
For a guaranteed effect, it is recommended to rinse the cooling system with 7 minutes of rinsing with HG9017 or HG9014 before repair.
This composition is designed to repair leaks in radiators and car cooling systems that do not require disassembly, removal and soldering of the radiator. This composition for the repair of radiators and cooling systems Hi-Gear HG9025 prevents antifreeze (antifreeze) leaks: at the place where copper radiators are soldered; plastic tanks at the intersection with a modern composite radiator aluminum heat exchanger; through broken radiator pipes (before repair it is recommended to press them with pasatizh above and below the leak); through the pump or thermostat seal (white engine stains); through radiator and heater tap pipes; through the heater valve seal (antifreeze flows inside); from the heater radiator (the smell of antifreeze in the cabin and the glass sweats). Hi-Gear HG9025 does not evaporate, withstands high temperatures, stays in the system and prevents further leaks.
Safe for aluminum, steel, cast iron, non-ferrous alloys, plastics and rubber.
HG9025 is compatible with all types of antifreeze and water.
Does not block the radiator pipes, hardens only due to leakage.
The radiator must be clean and filled with coolant.
Warm up the engine with the radiator cap open and the internal heater tap open.
Shake the product and pour into the radiator.
Close the radiator cap. Run the engine at high speed or drive until the leak stops.
To prevent further leakage, do not spill coolant.
The package is designed for cooling systems up to 17 liters.
For a guaranteed effect, it is recommended to rinse the cooling system with 7 minutes of rinsing with HG9017 or HG9014 before repair.
Delivery
- in office ( SIA “DANS G”, Jāņa Asara iela 22-1 )
- Venipak (delivery 4.00 €. Free delivery above 90.00 €)
- Omniva (delivery 3.00 €. Free delivery above 90.00 €)
Payment
- cash
- bank transfer
- creditcard, Swedbank, SEB, Citadele, Luminor
Only registered customers who have made a successful purchase can add a review. Log in
